Go To Top Go Up Go Back Go Forward

FMS Print Codes

The output FMS prints is controlled by the following FMS Parameter print codes:

You may set these individual print codes to any value or set them all to the same value with the PRINT parameter.

To determine the value of a print code, select the options from the table below. Then add the corresponding print code values for the options selected. Because these values are a power of 2, they have the effect of setting the appropriate bits in the print code parameter. For example, setting IPRS to 34 will print out the default headings (IPRS=2) and the solution vector (IPRS=64).

The following table lists the output printed for each code option and FMS parameter.

CODE IPRI IPRA IPRF IPRS IPRMV IPRVV IPRDV
0 Nothing Nothing Nothing Nothing Nothing Nothing Nothing
1 Start &
Stop
Message
Start &
Stop
Message
Start &
Stop
Message
Start &
Stop
Message
Start &
Stop
Message
Start &
Stop
Message
Start &
Stop
Message
2 Matrix
Blocking
Information
Segment
Group
Timing
Segment
Group
Timing
Vector
Group
Timing
Vector
Group
Timing
Vector
Group
Timing
Vector
Group
Timing
4 - - - {RHS} {RHS} {RHS} {X} {X},{Y} {X},{Y}
8 - - - [Si],{Vi} Reduced Reduced [F] [F] [F]
16 - - - - - - Scaled Scaled [D]{X} - - - {X}T[D]
32 - - - - - - Pivoted
Equations
{SOL} {Y} - - - - - -
64 Profile you
specified
[D] [D] - - - [D] - - - [D]
128 Profile after
blocking
- - - [1/D] [1/D] - - - - - - - - -
256 Block
Selection
[AL],
[AU]
[AL],
[AU]
- - - [AL],
[AU]
- - - - - -
512 - - - - - - [L],
[U]
[L],
[U]
- - - - - - - - -
1024 Analysis of
Profile
- - - Actual
Mflops
Actual
Mflops
Actual
Mflops
Actual
Mflops
Actual
Mflops
2048 - - - - - - Parallel
Scaling
- - - - - - - - - - - -
4096 - - - User &
System
Times
User &
System
Times
User &
System
Times
User &
System
Times
User &
System
Times
User &
System
Times
8192 Write Profile
and quit
ATERMS Density - - - - - - - - - - - -
16384 - - - I/O Hist. I/O Hist. I/O Hist. I/O Hist. - - - - - -


Go To Top Go Up Go Back Go Forward
Copyright © Multipath Corporation